Diameter |
N/A 10 in |
Operating Life |
N/A Over 250,000 cycles, tested to over 2M cycles |
Operate Time |
N/A 5 seconds |
Noise |
N/A Very Quiet |
Direction of Rotation |
N/A CCW to Open, viewed from top of actuator |
Light Emitting Diode (LED) Light Indicator (Open) |
N/A Green |
Light Emitting Diode (LED) Light Indicator (Close) |
N/A Red |
Alternating Current (AC) Electrical Power Running Voltage |
N/A 24 V |
Running Electrical Power Current |
N/A 2.8 V·A |
Holding Electrical Power Current |
N/A 1 V·A |
Mounting |
N/A Bosses at both ends for #8 screws |
Damper Shaft Shape |
N/A Square |
Damper Shaft Size |
N/A 0.215 x 0.215 in |
Housing |
N/A Molding Plastic Case |
Electrical Connection |
N/A Screw terminals. COM and 24 VAC for power. GND. VP and +5V can be used to control additional actuators (A80-VP) in the same zone. |
Operation |
N/A Variable Position, Wireless Control |
Rotation Angle |
N/A 90 º |
Torque (Open and Close) |
N/A 80 in·oz5 in·lb |
Adjustable Positioning |
N/A Damper position is controlled by the remote control or by the wireless, battery operated thermostat. |
Adjustable Close Limit |
N/A The Close position can be set or limited using the internal cam. Simply loosen the screw and rotate the red cam CW and tighten screw. Minimum close position can be used to insure some air flow even when damper is closed. |
Direct Diffuser/ Register Control |
N/A The A80-WL can be used with the remote or wireless thermostat to control air flow from the diffuser and eliminate the over-heating and over-cooling found in many businesses. By limiting the air flow to areas that do not need it, the air flow is directed to spaces that need more conditioning and the HVAC system operates less and saves energy. |
Application |
N/A
|
Features |
N/A
|