Alan Manufacturing, Inc
3927 East Lincoln Way
Wooster, Ohio US

Phone: (800) 435-2526 or (330) 262-8077
Fax: (877) 333-2526 or (330) 262-1556
Email: alansteel@alanmfg.com
Website: www.alanmfg.com
Print Back
The Dryer-Ell is a re-engineered dryer exhaust fitting that exhibits a larger radius and a smooth interior, providing a net gain of approximately 4.8 feet in allowable duct length when used as a replacement to the standard 4" ell used in the dryer venting trade. 28 Gauge, ships in two pieces to be assembled in the field.
Unit of Measure

Specifications

Diameter

 N/A 4 in

Radius

 N/A 10 in

Elbow Radius

 N/A 3 in3.5 in

Overall Length

 N/A 18 in

Length

 N/A 4.8 ft

Thickness

 N/A 26 gauge28 gauge

Elbow Angle

 N/A 90 º

Performance Data

Material

 N/A
  • Deep drawn process made from 0.018" (26 gauge) aluminized steel
  • Distinct male and female ends
  • Engineered with ASHRAE methodology
  • Engineering evaluation by Underwriters Laboratories proved the elbow to be 500 % more efficient than the typical 3.5" radius elbow.

For Use

 N/A
  • Dryer exhaust fitting (attic or floor joists)
  • Replacement to the standard 4" ell
  • 90 degree elbow for dryer venting

General Information

Benefits

 N/A
  • Larger radius and smooth interior
  • Gain 4.5 feet of duct run
  • Increases dryer efficiency
  • No 5 foot reduction
  • Replaces restrictive 3" radius elbow
  • Alternative to a booster fan

Features

 N/A
  • Long turn 90 degree elbow
  • 2 piece construction for easy assembly
  • 7 fastening tabs for hook and twist assembly
  • Secondary securing accomplished with 5 pre-drilled screw holes
  • Notch for snaplock pipe material