Alan Manufacturing, Inc
3927 East Lincoln Way
Wooster, Ohio US

Phone: (800) 435-2526 or (330) 262-8077
Fax: (877) 333-2526 or (330) 262-1556
Email: alansteel@alanmfg.com
Website: www.alanmfg.com
Print Back
Unit of Measure

Specifications

Wall Size

 N/A 2 x 4 in

Exhaust Direction

 N/A Upward

Thickness

 N/A 22 gauge

Industry Standards

 N/A Underwriters Laboratories (UL)

Lower Port Size

 N/A 4 7/8 x 3 1/8 in

Lower Port Shape

 N/A Oval

Distance from Nailing Flange to Rear of Box

 N/A 3 1/2 in

Overall Height

 N/A 21 in

Overall Width

 N/A 12 1/2 in

Overall Depth

 N/A 4 3/8 in

Inside Height

 N/A 18 1/4 in

Inside Width

 N/A 9 1/2 in

US Patent

 N/A 5,476,183 6,419,102

Performance Data

Material

 N/A
  • Model 350 deep drawn with 0.028 aluminized steel (22 gauge)
  • UL Classified for a one hour wall
  • Made in the USA

For Use

 N/A
  • Dryer vent hose receptacle
  • Doubles as gas connection receptacle
  • Meets code requirements as a clean-out

General Information

Benefits

 N/A
  • Locate the dryer right up against the wall
  • Flex is protected from getting squished
  • Lint build-up is minimized
  • Efficiency is increased...clothes dry faster
  • Dryer related service calls are almost eliminated
  • Laundry room appears larger to prospects
  • Reduces the fire hazard
  • Reduces mold potential in the wall

Features

 N/A
  • No trim-ring piece is needed
  • Elbow eliminator...gain 5 foot of duct run
  • Surface is paintable, no masking needed
  • Applauded by Mechanical Inspectors
  • Over 1.5 MILLION Dryerboxes installed
  • Convenient Duct Support Tab