Alan Manufacturing, Inc3927 East Lincoln Way
Wooster, Ohio US
Phone: (800) 435-2526 or (330) 262-8077
Fax: (877) 333-2526 or (330) 262-1556
Email: alansteel@alanmfg.com
Website: www.alanmfg.com
Alan Manufacturing, Inc
| Items |
 AZRDPOPC/A80-MOC-04 eControls Model A80-MOC 4 Inch (in) Damper Diameter Electric Actuator List Price Quote
|
AZRDPOPC/A80-MOC-05 eControls Model A80-MOC 5 Inch (in) Damper Diameter Electric Actuator List Price Quote
|
AZRDPOPC/A80-MOC-06 eControls Model A80-MOC 6 Inch (in) Damper Diameter Electric Actuator List Price Quote
|
AZRDPOPC/A80-MOC-07 eControls Model A80-MOC 7 Inch (in) Damper Diameter Electric Actuator List Price Quote
|
AZRDPOPC/A80-MOC-08 eControls Model A80-MOC 8 Inch (in) Damper Diameter Electric Actuator List Price Quote
|
|||||
| Damper Diameter | 04 in | 05 in | 06 in | 07 in | 08 in | |||||
| Operation | Open/Close or Modulating | |||||||||
| Torque (Open and Close) | 80 in·oz5 in·lb | |||||||||
| Rotation Angle | 90 º | |||||||||
| Adjustable Positioning | Damper position is controlled by 24 VAC on Open or Close. | |||||||||
| Operate Time | 3 seconds from fully Open to Fully Closed | |||||||||
| Noise | Very Quiet | |||||||||
| Direction of Rotation | CCW to Open, viewed from top of actuator | |||||||||
| Light Emitting Diode (LED) Indicator Color (Open) | Green | |||||||||
| Light Emitting Diode (LED) Indicator Color (Close) | Red | |||||||||
| Alternating Current (AC) Electrical Power Holding Voltage | 24 V | |||||||||
| Running Electrical Power Current | 2.4 V·A | |||||||||
| Holding Electrical Power Current | 1 V·A | |||||||||
| Mounting | Mounting bosses at both ends for #8 screws. | |||||||||
| Damper Shaft Shape | Square Shaft, Keyed | |||||||||
| Damper Shaft Size | 0.215 x 0.215 in | |||||||||
| Housing | Molded plastic case | |||||||||
| Electrical Connection | Screw Terminals, COM, Open, and Close | |||||||||
| Length | 4.64 in | |||||||||
| Width | 2.41 in | |||||||||
| Height | 1.30 in | |||||||||
| Zone Number | 4 | |||||||||
| Additional Information |
|
|||||||||
| Eliminate Bypass Duct Work | Used with the eWD2 and eWD3 zoning panels, the A80-MOC can be used to bypass excess air flow by opening just enough to maintain the minimum airflow and eliminate the need for bypass ducts and a barometric dampers. | |||||||||
| Adjustable Close Limit | The Close position can be set or limited using the internal cam. Simply loosen the screw and rotate the red cam CW and tighten screw. Minimum close position can be used to insure some air flow even when damper is closed. | |||||||||
| Note | Made in the USA. | |||||||||
|
|
||||||||||
