Serving the HVAC industry since 1992
Call: (800) 435-2526Email SearchMenu
Request Information
The A80-WL provides a low cost actuator that can be used with dampers up to 12-inch diameter and 1-inch of static pressure. The actuator uses 24 VAC power and is controlled remotely using the handheld Remote Control WRC or the Wireless Thermostat T200WL01
  • Improves comfort by eliminating overcooling and overheating
  • Saves energy by automatically directing over-conditioned air flow to other areas
  • Saves energy by reducing air flow to spaces not being used
Unit of Measure

Specifications

Diameter

 N/A 6 in

Operating Life

 N/A Over 250,000 cycles, tested to over 2M cycles

Operate Time

 N/A 5 seconds

Noise

 N/A Very Quiet

Direction of Rotation

 N/A CCW to Open, viewed from top of actuator

Light Emitting Diode (LED) Light Indicator (Open)

 N/A Green

Light Emitting Diode (LED) Light Indicator (Close)

 N/A Red

Alternating Current (AC) Electrical Power Running Voltage

 N/A 24 V

Running Electrical Power Current

 N/A 2.8 V·A

Holding Electrical Power Current

 N/A 1 V·A

Mounting

 N/A Bosses at both ends for #8 screws

Damper Shaft Shape

 N/A Square

Damper Shaft Size

 N/A 0.215 x 0.215 in

Housing

 N/A Molding Plastic Case. Custom colors Available

Electrical Connection

 N/A Screw terminals. COM and 24 VAC for power. GND. VP and +5V can be used to control additional actuators (A80-VP) in the same zone.

Operation

 N/A Variable Position, Wireless Control

Rotation Angle

 N/A 90 º

Torque (Open and Close)

 N/A 80 in·oz5 in·lb

Adjustable Positioning

 N/A Damper position is controlled by the remote control or by the wireless, battery operated thermostat.

Dimensions

Length

 N/A 4.64 in

Width

 N/A 2.41 in

Height

 N/A 1.30 in

Adjustable Close Limit

Adjustable Close Limit

 N/A The Close position can be set or limited using the internal cam. Simply loosen the screw and rotate the red cam CW and tighten screw. Minimum close position can be used to insure some air flow even when damper is closed.

Direct Diffuser/ Register Control

Direct Diffuser/ Register Control

 N/A The A80-WL can be used with the remote or wireless thermostat to control air flow from the diffuser and eliminate the over-heating and over-cooling found in many businesses. By limiting the air flow to areas that do not need it, the air flow is directed to spaces that need more conditioning and the HVAC system operates less and saves energy.

Application

Application

 N/A
  • Control air flow from a ceiling diffuser, register or grill
  • Wireless control using the wireless remote or wireless thermostat
Dampers

Features

Features

 N/A
  • Damper slips into diffuser collar between the flex duct drop and ceiling diffuser, or in flex duct run
  • A Remote controls up to 32 different AZRD-A80WL Dampers. A Wireless Thermostat controls one or more AZRD-A80WL Dampers controlling air flow to a space where the thermostat is located
  • Multiple dampers can be powered by a single 24 VAC transformer installed in the ceiling space
  • Mechanical Closed position limit can be used to insure minimum air flow
^