Item # Model 3D, 2 x 4 Inch (in) Wall Size and Downward Exhaust Direction 22 Gauge Aluminized Steel Dryer Box On Alan Manufacturing, Inc.

Serving the HVAC industry since 1992

Call: (800) 435-2526Email

Request Information

Unit of Measure

Specifications | Performance Data | General Information

Specifications

Wall Size	N/A 2 x 4 in
Exhaust Direction	N/A Downward
Thickness	N/A 21 gauge
Industry Standards	N/A Underwriters Laboratories (UL)
Lower Port Size	N/A 4 7/8 x 3 1/8 in
Lower Port Shape	N/A Oval
Distance from Nailing Flange to Rear of Box	N/A 3 1/2 in
Overall Height	N/A 19 in
Overall Width	N/A 16 3/4 in
Overall Depth	N/A 4 3/8 in
Inside Height	N/A 16 in
Inside Width	N/A 14 in
US Patent	N/A 5,476,183 6,419,102

Performance Data

Material	N/A Model 3D deep drawn with 0.031 aluminized steel (21 gauge) UL Classified for a one hour wall Made in the USA
For Use	N/A Dryer vent hose receptacle Doubles as gas connection receptacle Meets code requirements as a clean-out

General Information

Benefits	N/A Locate the dryer right up against the wall Flex is protected from getting squished Lint build-up is minimized Efficiency is increased...clothes dry faster Dryer related service calls are almost eliminated Laundry room appears larger to prospects Reduces the fire hazard Reduces mold potential in the wall
Features	N/A No trim-ring piece is needed Elbow eliminator...gain 5 foot of duct run Surface is paintable, no masking needed Applauded by Mechanical Inspectors Over 1.5 MILLION Dryerboxes installed Convenient Duct Support Tab

^